XCP Rust Blocker CLEAR COAT - High Performance Rust Protection Spray 500ml Trigger Bottle

Product Information

Then it’s simply a case of spraying the corrosion inhibitor onto all the metal surfaces, avoiding the brakes and tyres. Do not apply any of them to the brake disc carriers as centripetal force will carry them onto the braking surfaces. Konkurenční výrobky jsou ještě dražší a s těmi levnějšími je spojuje to, že XCP v jeho vlastnostech a užitné hodnotě nepředčí.

Pokud si myslíte, že pevné nátěry jsou lepší, tak opravdu nejsou. Podívejte se na spodek svého vozu rok, dva po nástřiku( viz náš blog). Dilute 1 part XCP CLEANER & DEGREASER with up to 10 parts water (select according to strength of cleaning power). This isn’t an exhaustive list of corrosion protectants, but it does cover the most popular that were available at the time of testing. As soon as possible I’ll carry out another test, which will include the following:Apply product neat to the surface that requires degreasing. The liquid can also be used as a degreasing soak (bath) for a few minutes, before cleaning off. ACF-50 can be a little reluctant to come out of the aerosol can on a cold day, so keep it indoors for a while, or put it in some warm water.

XCP Universal Parts Cleaner is a powerful non-chlorinated, solvent based fast evaporating cleaner and degreasing agent for use on a wide variety of parts and surfaces. It removes dirt, grease, oil and grime.

XCP was born

These products were all selected based on their claims, or after recommendation by the Bennetts Facebook community, but it’s obvious that those designed specifically as corrosion protectants tended to fare the best in this corrosion test; GT85, for instance, isn’t sold as a corrosion inhibitor but many people use it as such, assuming it’s superior to WD-40 (both products are from the same parent company). Before applying any rust inhibitor, it’s important to get your bike thoroughly clean. Also, while many claim good water dispersing properties, you’ll get far better results if you dry the bike thoroughly.

So, unlike some of the cleaning products I tried, you can spray the corrosion protectants (and multipurpose sprays) featured here without any worries. There is a marked difference in the way some of these products sit on the surfaces of your bike, which is worth noting when considering what makes for the best corrosion protectant. Based on their ability to prevent corrosion with just one application, the following products are my choices for recommended rust proofers. In the Best Motorcycle Cleaners test I used samples of painted steel, anodised aluminium, ABS plastic, polycarbonate, acrylic and chain O-rings to ensure material compatibility. Clear Coat po nanesení a zavadnutí vytvoří měkký, tenký a nelepivý film. Clear Coat bude chránit před rzí a vnějšími vlivy, zatímco povrch bude stále vypadat skvěle a bude odolný vůči nečistotám.

Buying

However, it’s been out of the scope of my testing to look at lubrication performance – where relevant – and this is a test that’s purely trying to find the best way to stop your motorbike from going rusty…

How often you have to put these on will depend on their performance, but also how often you clean the bike. There are plenty of corrosion inhibitors out there that promise months or even years of protection, but my testing indicates that – at least for a regular winter rider who keeps their bike clean – this is might not be the case. In my testing, none of the corrosion protectants I sampled caused any noticeable harm to any of the materials used on motorcycles.Velmi špatně, za extrémních podmínek! Nebojíme se říci, že základní formule XCP je nehořlavá! Samozřejmě, netýká se to hnacího plynu ve sprejích, ale po nanesení a zaschnutí XCP nemusíte mít žádné obavy například z blízkosti výfukového potrubí. It creates a long lasting soft film coating to protect any steel, metal or alloy surface against the effects of rust and corrosion. Snášenlivost s gumou a plasty jeden z důvodů velmi snadné aplikace na podvozky, kde není třeba plastové části zakrývat. Bulldog BDX 01 was one of the big surprises, given that it’s a multi-purpose spray; to have out-performed ACF-50 (when applied in a light coat with a compressor) is very impressive. Keep in mind though that I’m only testing it as a corrosion protectant, and haven’t assessed its lubricity performance. If used solely for rust inhibiting, there are cheaper and more effective products. Thanks to Evotech Performance , manufacturers of motorcycle parts & accessories, who used their UK factory to cut the samples of steel.